Ways to Secure Your WIFI

With all this talk about the hacking going on these days, one can’t help but feel the need to have a proper security system for everything that could be hacked, hence the need to secure your Wireless Connection (Wi-Fi).

Ways to Secure Your WIFI

If someone hacks into your Wi-Fi, they can not only use your internet connection but can also use that as a way to get into your personal files on your computer. So not only will the speed of your internet connection decline, but there’s also a chance that your personal privacy will be breached. Not to mention the increase in your bill incase your billing is based on data usage.

There are a few straightforward steps that you can take to prevent all of this from happening.

1) Change Your Default Password:

The obvious and most straightforward solution to avoid getting hacked is to have a hard password that can’t be cracked. When you purchase a router, the password is automatically set to default. To change it:

  • Open your router’s setting page by typing this in your browser “”.
  • Enter the correct username and password using the manual of your router.
  • Once you are in, you can change the password.

2) Rename your Network’s SSID:

SSIID stands for Service Set Identifier. In layman terms, it is the name of your wireless connection. Using a generic name like that of the vendor’s, your home address, or phrase can make it easier for the hacker to locate and access your network. Knowing the default SSID’s passwords is hacker 101. Therefore it’s better to have a different SSID that is more unique.

This can be done via the router’s settings page.

3) Use a WPA/WPA2 or an AES Encryption:

Encryption is needed to prevent other computers in your vicinity from logging in and using your internet connection.

Best encryption methods are:

  • WPA (Wi-Fi Protected Access)
  • AES ( Advanced Encryption Standard)
  • WPA2 (Wi-Fi Protected Access 2)

Go to your router’s settings page and turn on one of the encryptions mentioned above to stay safe.

4) Turn on the Router Firewall:

One of the easiest ways to stay safe when using a wireless connection is to always have your firewall turned on. It’s enabled even in the default settings most of the time, but in the case, it isn’t, use the router setting page and turn it on.

5) Keep your Router’s Firmware up-to-date:

There’s a reason all these creators keep offering new updates for software. In this case, your router has firmware that needs to be upgraded whenever a new upgrade is available. Every new upgrade provides you with a better security system and removes the flaws/glitches that might have been present in an older version.

This can be done by regularly checking your router’s vendor’s site and downloading and subsequently installing the new update.

6) Save all your MAC addresses in the Router’s Setting:

All the digital devices (cell phones, laptops, etc.) have a MAC address. MAC addresses can be found using the security settings of each device. You can then add all these addresses to your router security settings, so only the tools Ways to Secure Your WIFI whose MAC address is in the settings will be allowed to connect to your internet connection.

7) Hide your Network using VPN:

VPN stands for Virtual Private Networks. It will help you hide your internet activity and thus your network by re-routing your activity via several remote servers. Ways to Secure Your WIFI In other words, it will make your connection incognito.

8) Limit your Wireless Signal Range:

This can be achieved by altering the mode of your router. Use your particular router’s manual to change the limit, as every model WIFI has a different method.
Otherwise, you can re-locate your router to the center of your house, use aluminum foil to reduce signals, or just hide it in a closet or under a bed if your router has a high signal range.

After all these safety measures, WIFI is in place, you can sleep soundly at night knowing no one out there is stealing your connection or private information. How easy was that?

Leave a Reply